Plastic Magnetic Compound for Injection Moulding XIANGYING

Plastic magnetic compound consist of bonded magnetic ferrite powder and Nylon6 or Nylon12. The magnetic compound is mostly for the manufacturing of brushless electric motor rotors and plastic magnetic rings through injection moulding. All the additives have be added, and the magnetic compound can be injection moulding directly. All the materials are in accordance with the European RoHS directive.

 

Plastic Magnetic Compound for Injection Moulding
Model
XY08
XY15
XY17
XY21
Br (T)
0.18
0.25
0.26
0.29
Hcb (KA/m)
130
184
184
184
Hcj (KA/m)
160
216
216
208
BHmax (KJ/M3)
6.5
11.9
13.5
16.8
Density (g/m3)
3.8
3.8
3.8
3.8
Hardness (R)
90 - 100
100 - 120
100 - 120
100 - 130
Fluexral Strength (MPa)
108 - 118
108 - 118
108 - 118
108 - 118
Expasion Coefficient ()
10-4 - 10-5
10-4 - 10-5
10-4 - 10-5
10-4 - 10-5
Heat-resistance Temperature ()
150
150
150
150
Injection Temperature ()
270 - 280
270 - 280
270 - 280
270 - 280

NOTE: 1mT=10Gs 1KA/m=4Oe 1KJ/m3=4ݡ10MGOe

Magnetic Compound for Extrusion and Calendering Magnetic Compound for Injection Moulding Magnetic Strip Magnetic Sheet Magnetic Paper

Ferro Sheet Magnetic Powder Ferrite Magnet NdFeB Magnet SmCo Magnet AlNiCo Magnet Ferrite Core Home

TEL: 0086-592-5124090 FAX: 0086-592-5141540 Email:magnets@189.cn
Address: 31D, Baoda Building, No.293 Jiahe Road, Xiamen 361009, China
Magnetic Compound copyright(c) Xiangying Magnetic Materials Co., Ltd.